Ocean Swift: Quick Cut

Quick Cut is a simple bread-and-butter quick EQ solution providing both low and high cut with an adjustable slope feature.

 

Discussion: https://forums.scopeusers.com/viewtopic.php?f=16&t=34691

Downloads

For PCI:
http://scope.zone/…/setup_-_ocean_swift_-_quick_cut_-_pci.exe

For XITE-1:
http://scope.zone/…/setup_-_ocean_swift_-_quick_cut_-_xite.exe

 

Developer’s Web Site:  http://www.oceanswift.net

 

Quick Cut

 

 

Shroomz~> Spinner

Planet Z: https://forums.scopeusers.com/viewtopic.php?f=16&t=27167

Download: https://forums.scopeusers.com/download/file.php?id=4947

Presets: https://forums.scopeusers.com/download/file.php?id=4920

SPINNER is a FAT 24dB multimode resonant filter with Low Pass, High Pass, Band Pass & Notch modes

Frequency range – 20 Hz to 20 kHz
Modulation frequency range 0.1 Hz to 1.0 Hz
Spread parameter – 0 to max (spreads frequency of poles 3&4 away from poles 1&2)

Let me know what you think & if you find any issues or problems.

~Mark

SPINNER

 

Shroomz~> Spinner DE

Planet Z: https://forums.scopeusers.com/viewtopic.php?f=16&t=27200

Download: https://forums.scopeusers.com/download/file.php?id=4970

Here is a Delay Edition of SPINNER. The configuration is Delay1 > SPINNER > Delay2. The delays are purely tempo-based. You can set the BPM values with the BPM pots or by typing your desired tempo into the BPM displays. After setting your tempo/s you can then set separate Quantize values for L & R to give you your desired delay time/s.

Presets should be fully working, but I haven’t made very many for this yet, so in the meantime, you can either create your own preset bank from scratch or make a copy of the ‘SPINNER.pre’ file & rename it to ‘SPINNER DE.pre’ which will allow you to load the default SPINNER presets.

Have fun & let me know what you think. :cool:

~Mark

SPINNER_DE

 

Shroomz~> SPACE EQ

Planet Z: https://forums.scopeusers.com/viewtopic.php?f=16&t=27041

Download: https://forums.scopeusers.com/download/file.php?id=4706

SPACE EQ – simple Stereo EQ device for mixing & mastering

I’m pleased to give you my first new Scope device creation in over 5 months – SPACE EQ. It’s a very simple stereo-only device that combines EQs based on on Creamware’s excellent 2-band parametric with a spacial technique which doesn’t involve delay or reverberation. The spacial effect can be turned off simply by turning the ‘SPACE’ parameter fully left. There’s also a softclip at the output stage which can be switched on & off.

The Low & High frequency EQ parameters all use stepped potentiometers for ease of making very quick settings. The EQ values & ranges have been set up with the sole idea in mind that the device can be used for mixing & mastering purposes (probably with no or very little use of the SPACE parameter, which is a special effect for those who like to dabble with experimental mixing techniques). I made SPACE EQ for my own mixing knowing that I will sometimes wish to mix with 3 or 4 dB boosts at 60-80Hz & 8-16kHz.

Feel free to let me know what you think..

Have fun folks.. :cool:

~Mark

SPACE_EQ

 

Erminardi: LE-1 Loudness Enhancer

Planet Z Thread

Download LE-1

LE-1 is a Loudness Enhancer.
I’ve built this for my own needs, but if U find it useful, take it for free ;)
It’s not formally a classic compressor and not a classic EQ, it’s a “signal fattener” with “eq” controls for high and low band plus a tube warmer.
I’ve built it for invigorate my “poor & constipated” native soft synthesizers (FM7, and some freeware). It’s calibrated in my own taste.
Try it also with standard Creamware synths like Uknow, Saturn or Miniscope, or try with voice recording and (with carefulness) with some poor MP3 songs (warning, maximized mix and/or higher pot levels can reach some unwanted distortion).

If U find some bugs and if U have some opinion, please let me know ;)

Enjoy =)

Dropout – www.cactusound.com

sound(at)cactusound.com

le-1