Ocean Swift: Quick Cut

Quick Cut is a simple bread-and-butter quick EQ solution providing both low and high cut with an adjustable slope feature.

 

Discussion: https://forums.scopeusers.com/viewtopic.php?f=16&t=34691

Downloads

For PCI:
http://scope.zone/…/setup_-_ocean_swift_-_quick_cut_-_pci.exe

For XITE-1:
http://scope.zone/…/setup_-_ocean_swift_-_quick_cut_-_xite.exe

 

Developer’s Web Site:  http://www.oceanswift.net

 

Quick Cut

 

 

DerKnott: Flu_Liq

Planet Z: https://forums.scopeusers.com/viewtopic.php?f=16&t=24182

Download: https://forums.scopeusers.com/download/file.php?id=2474

Modulation device totally unique for the Scope platform!

Some quotes from Planet Z:

Thank you very much, Martin !!! :D 
I tried the FLU_LIQ with the guitar for a while, and I can assure you, 
this is the best I´ve had since the Electro Harmonix ´s Electric Mistress, way back in in the mid-seventies, and not near as noisy as the Mistress. 
In fact, it´s possible to make an almost exact copy of the Mistress´s sound, minus the noice, wich I don´t miss. 
Great work, Martin !!

I forgot about trying to create a Liquid effect long ago as phasers and flangers and chorus always introduce artifacts that I wasn’t seeking. 
I know this is what I have yearned for years ago. :D 
I use to try a slow phaser on a rotary, you name it, and could never get it. 
This has to be the one that escaped me, but was captured by you. 
You have made so many nice things that work really well, but you hit this one out of the park IMO.

Flu_liq

 

DerKnott: MOVEQ+

Planet Z: https://forums.scopeusers.com/viewtopic.php?f=16&t=20737

Download: https://forums.scopeusers.com/download/file.php?id=2061

Thanks for downloading MOVEQ+ so many times!!!!
Here comes MOVEQ+ 1.3.

I’m so sorry, that I realized 1 year after first release of a ‘final’ version, that dsp-distribution wasn’t optimal. That could cause problems when using MOVEQ+ in my MOVamily-MS-processor.
Here comes the optimized versions 8 & 4 inluding the CUT-versions.
2-EQ-version was O.K. with dsp-distribution.

In the zip you’ll find a little present to dry the tears. I call it “M-EQ-S”. It’s a very simple but nice device, I think.

Martin

P.S. As with any of my freeware devices which are in a way never-ending-betas I do not give any guaranty for anything. Try on your own risk!

moveq

 

HifiBoom: RSPV-01 High Class Plate

Planet Z: https://forums.scopeusers.com/viewtopic.php?f=16&t=22376

Download: https://forums.scopeusers.com/download/file.php?id=1221

Okay I am happy to announce a new reverb plug-in.

Forget my old reverb checkouts….
I`ve reworked the stuff from scratch with better algo design…

Much work has gone into it ! :P

Now with more friendly surface and small manual !
Special care was also done about DSP usage. So its pretty low on the DSP hit :)

Have fun ! :)

RSPV-Plate

 

Shroomz~> Spinner

Planet Z: https://forums.scopeusers.com/viewtopic.php?f=16&t=27167

Download: https://forums.scopeusers.com/download/file.php?id=4947

Presets: https://forums.scopeusers.com/download/file.php?id=4920

SPINNER is a FAT 24dB multimode resonant filter with Low Pass, High Pass, Band Pass & Notch modes

Frequency range – 20 Hz to 20 kHz
Modulation frequency range 0.1 Hz to 1.0 Hz
Spread parameter – 0 to max (spreads frequency of poles 3&4 away from poles 1&2)

Let me know what you think & if you find any issues or problems.

~Mark

SPINNER

 

Shroomz~> Spinner DE

Planet Z: https://forums.scopeusers.com/viewtopic.php?f=16&t=27200

Download: https://forums.scopeusers.com/download/file.php?id=4970

Here is a Delay Edition of SPINNER. The configuration is Delay1 > SPINNER > Delay2. The delays are purely tempo-based. You can set the BPM values with the BPM pots or by typing your desired tempo into the BPM displays. After setting your tempo/s you can then set separate Quantize values for L & R to give you your desired delay time/s.

Presets should be fully working, but I haven’t made very many for this yet, so in the meantime, you can either create your own preset bank from scratch or make a copy of the ‘SPINNER.pre’ file & rename it to ‘SPINNER DE.pre’ which will allow you to load the default SPINNER presets.

Have fun & let me know what you think. :cool:

~Mark

SPINNER_DE

 

DerKnott: MuBaCo V

Planet Z: https://forums.scopeusers.com/viewtopic.php?f=16&t=20875

Download: https://forums.scopeusers.com/download/file.php?id=1330

Presets: https://forums.scopeusers.com/download/file.php?id=1331

MuBaCo V is getting close to its final beta stage…
I post this version to give you a first impression of this beautiful device. Functionality works the way it should, but there is still lot to do with some layout-things.

IMPORTANT!!!!!!!

– put files 1, 2, f1, f2, sc2, sc, tc1b in your DSP-folder:
Otherwise MuBaCo will not work.

– don’t forget to try the different band-saturation-modes

– 12db filters are not so easy to handle so I put them on the experimental side as an additional feature

=> band-saturation and other features need serious DSP. Turn off when using small cards. There is no guaranty MuBaCo will work properly on small cards regarding phase issues. I tested it on a 15 DSP card!

I have tested MuBaCo carefully and found it very usefull in my everyday-work. With the new surface it’s not 100% finished, but I couldn’t hold it back any longer.
As with all my devices, there is no guaranty for anything. Consider them as experimental beta-stuff.
Work with them on your own risk.

MuBaCo is free, you may give it for free to your friends, but you are not allowed to take any money for it or distribute it widely.

If you find MuBaCo gives you a value that’s worth some money, please SUPPORT THE SCOPE PLATFORM, SC and the 3rd Party developers by spending money on some new devices by them or a new SCOPE-card !!!!

1000000 Thanks for the new supercool surface by PIXELBITES.

MuBaCo-V-Routing-window